MegaGen AnyOne

Also known as: AnyOne, AnyOne Internal

A tapered implant from MegaGen offered with an 11-degree internal hex connection and a single prosthetic platform across almost the whole diameter range.

Compare this implant

Quick facts

Manufacturer	MegaGen Implant Co., Ltd.Manufacturer-reported[1][2]
Body geometry	Tapered body with a straight coronal section, which MegaGen says makes insertion depth easier to controlManufacturer-reported[1]
Thread design	Three thread variants: a regular thread for general use, a deep thread with greater thread depth for soft bone, and a bevelled “Special 7 mm” fixture for irregular ridges; pitch 0.8 mmManufacturer-reported[1]
Apex design	Dome-shaped apex without an apical hole, with grooves; apex diameters are specified per fixture sizeManufacturer-reported[1]
Material	Manufacturer documentation not located
Surface	Manufacturer documentation not located(The AnyOne Internal catalogue refers to an improved surface treatment without naming it in the copy we were able to read.)
Connection	Internal hex with an 11-degree taper, 2.5 mm hex; a single prosthetic connection serves all fixture sizesManufacturer-reported[1]
Platform switching	Platform diameter is Ø3.9 mm on every fixture from Ø4.0 upwards, so wider fixtures carry a narrower platform than their bodyManufacturer-reported[1]
Available diameters	Regular thread in Ø3.5, 4.0, 4.5, 5.0, 6.0 and 7.0 mm; deep thread in Ø4.5, 5.5, 6.5, 7.5 and 8.0 mm; Special 7 mm in Ø4.5, 5.0, 6.0 and 7.0 mmManufacturer-reported[1]
Available lengths	7.0, 8.0, 9.5, 11.0, 12.5 and 14.5 mm; the Ø6.0, Ø7.0 and Ø8.0 regular and deep-thread fixtures stop at 12.5 mmManufacturer-reported[1]

Overview

AnyOne and AnyRidge are separate MegaGen designs with different connections — AnyOne uses an 11-degree internal hex, AnyRidge a 5-degree taper — so their components are not interchangeable even though both carry the “Any” prefix. The AnyOne range is organised by thread rather than by body shape: a regular thread for ordinary bone, a deeper thread for soft bone, and a short bevelled fixture for ridges that have resorbed unevenly. A single Ø3.9 mm platform runs across the range from Ø4.0 upwards, which simplifies the prosthetic side considerably. We have left the surface field empty because MegaGen’s AnyOne catalogue refers to an improved surface treatment without naming it.

Clinical positioning

What the manufacturer says this system is designed for. This is not the same thing as independent clinical evidence, which is set out separately below.

Presented by MegaGen as a straightforward system for clinicians at any level of experience, with the deep-thread variant aimed at soft boneManufacturer-reported

Further detail

Geographic availability	Requires manual verification

Clinical evidence

We have not yet completed a system-specific evidence review for MegaGen AnyOne. Insufficient system-specific evidence How we grade evidence

Similar implant systems

Popular comparisons

MegaGen AnyRidge vs AnyOne

The clearances below are held by MegaGen at brand level and cover its implant range, not MegaGen AnyOne specifically. We show them here because that is the level at which regulators actually issue them.

Regulatory record

Read this before drawing conclusions. A clearance or certificate means a device may legally be sold in a market. It is not a finding that the implant performs well, and it is not a comparison against other implants. In particular, FDA "clearance" is not FDA "approval" — clearance means the FDA accepted the device as substantially equivalent to one already on the market. What these actually mean →

FDA 510(k) clearance8 records

Cleared as substantially equivalent to a predicate device. Not an FDA approval, and not a finding of safety or effectiveness.

Number	Device	Holder	Date
K251232	MegaGen Zygoma Dental Implant System	Megagen Implant Co., Ltd.	2026-06-18
K242030	MegaGen Dental Implant Abutment	Megagen Implant Co., Ltd.	2025-01-13
K233450	MegaGen Dental Implant Abutment - Scan Healing Abutment; Temporary Abutment; Temporary Cylinder; Comfort Cap; Healing Cap; Healing Cap Screw; Milling Abutment; EZ Post Abutment; Extra EZ Post Abutment; EZ Post Cylinder; ZrGEN Abutment; Multi-unit Abutment; Multi-unit Angled Abutment; AXA Abutment (Straight); AXA Abutment (Angled); Abutment Screw; Cylinder Screw; Crown Screw	Megagen Implant Co., Ltd.	2024-01-22
K230618	MegaGen Dental Implant Systems Portfolio - MR Conditional	Megagen Implant Co., Ltd.	2023-10-11
K182448	AnyRidge Octa 1 Implant System	Megagen Implant Co., Ltd.	2019-10-09
K140091	XPEED ANYRIDGE INTERNAL IMPLANT SYSYEM	Megagen Implant Co., Ltd.	2014-12-12
K123870	XPEED ANYRIDGE INTERNAL IMPLANT SYSTEM	Megagen Implant Co., Ltd.	2013-03-27
K110955	ANYRIDGE INTERNAL IMPLANT SYSTEM	Megagen Co., Ltd.	2011-11-22

Other3 records

Registered device establishment in South Korea. Registration records where a device is made or handled; it is not a clearance, an approval, or any assessment of the product.

Number	Device	Holder	Date
3030089802	—	MegaGen Implant Co., Ltd. (Research Laboratories)	—
3005554774	—	Megagen Implant Co., Ltd.	—
1332 device records	—	MegaGen	—

Clearance records for MegaGen were retrieved from the issuing authority's own database, not from the manufacturer's marketing material. We attribute a clearance to a brand only when the filing holder belongs to that brand's corporate family — third-party clearances for compatible components are excluded, because they belong to the company that made the component, not to MegaGen.

Sources

Numbers match the citations beside each claim above.

Primary sources

[1]AnyOne Internal — Product Catalogue (English) — MegaGen Implant Co., Ltd.. Accessed 2026-07-21.
[2]MegaGen Implants — corporate website — MegaGen Implant Co., Ltd.. Accessed 2026-07-21.