Implant systems
Every implant system we have researched, with its manufacturer, material, surface, connection and the source behind each specification. Where we could not verify a fact, we say so rather than filling in a plausible answer.
64 published · 12 in research
- Alpha-Bio Tec ATID A cylindrical, parallel-walled implant from Alpha-Bio Tec with uniform threads, presented for dense bone.
- Alpha-Bio Tec DFI A slightly tapered implant from Alpha-Bio Tec on the internal hex platform, with a double thread of variable depth and an apex carrying cutting flutes.
- Alpha-Bio Tec NeO A tapered implant from Alpha-Bio Tec with two coronal micro-threads and platform switching, offered on the conical and internal hex platforms.
- Alpha-Bio Tec Spiral (SPI) A self-drilling, bone-condensing implant from Alpha-Bio Tec on the internal hex platform, listed in current catalogues as Spiral and formerly named SPI.
- Ankylos Ankylos A Dentsply Sirona implant system built around the tapered TissueCare connection, in which the abutment seats well inside a narrower platform, offered in four diameters identified by the letters A to D.
- Anthogyr Axiom BL A bone-level implant from Anthogyr with an extended, indexed three-lobed Morse taper connection of 2.7 mm diameter shared across every implant diameter.
- Astra Tech Implant System EV Astra Tech Implant System The Dentsply Sirona implant system built on the OsseoSpeed surface, offered in straight, conical and Profile body shapes with a one-position-only interface that also permits six-position indexing.
- BEGO Semados RS/RSX BEGO Semados A BEGO implant family in grade 4 pure titanium with the TiPurePlus surface and an internal taper connection, offered with either a machined shoulder (RS) or a microstructured shoulder (RSX).
- BioHorizons Tapered Internal BioHorizons A BioHorizons tapered implant with a conical internal hex connection and a Laser-Lok collar, sold alongside the newer Tapered Pro within the same prosthetic family.
- BioHorizons Tapered Pro BioHorizons A BioHorizons tapered implant in Ti-6Al-4V ELI alloy with buttress threads, a Laser-Lok collar over a resorbable blast textured body, and a platform-switched conical internal hex connection.
- bredent blueSKY bredent SKY The standard titanium bone-level implant of the German bredent SKY system, using a tube-in-tube connection.
- CAMLOG SCREW-LINE CAMLOG A CAMLOG implant in grade 4 titanium using the Tube-in-Tube connection, offered with a 1.4 mm machined shoulder (Promote) or a 0.4 mm machined shoulder (Promote plus).
- CONELOG PROGRESSIVE-LINE CAMLOG A CAMLOG implant in grade 4 titanium with a partly conical body and a 7.5 degree conical implant-abutment connection with three grooves, supplied with the Promote plus surface.
- Cortex SATURN Cortex A bone-level implant from the Israeli maker Cortex, with an internal hexagon connection and a distinctive external body shape.
- Cowellmedi INNO SLA Submerged Cowellmedi A bone-level submerged implant from Cowellmedi with an SLA surface and a hex/non-hex internal connection.
- Dentis OneQ-SL Dentis A tapered bone-level implant from Dentis with a coronal-to-apical diameter taper and an SLA surface.
- Dentis s-Clean SQ-SL Dentis A tapered, internal-hex bone-level implant from Dentis with a sandblasted, acid-etched surface, marketed under the s-Clean surface name.
- Dentium Implantium A tapered bone-level implant from Dentium with an internal hex conical connection, sharing its prosthetic platform with the SuperLine systems.
- Dentium NR Line A narrow-diameter bone-level implant from Dentium with a 3.1 mm body and a 10-degree internal conical connection with a square index.
- Dentium SuperLine A tapered, double-threaded bone-level implant from Dentium with an internal hex inside a conical connection and a single prosthetic platform across all diameters.
- Dentium SuperLine II A tapered bone-level implant from Dentium with a sharper, deeper thread and increased pitch compared with SuperLine, sharing the same internal hex conical platform.
- DIO UF(II) Implant System DIO A tapered bone-level implant from DIO with an internal Morse-taper connection and an SLA surface.
- DIO UV Active Implant System DIO A tapered bone-level implant from DIO with an internal Morse-taper connection and an SLA surface, spanning narrow to wide diameters.
- Global D twinKon Global D A French bone-level implant from Global D with an external tapered connection and a progressive double thread.
- Hiossen ET III SA A tapered two-piece implant from Hiossen, the US arm of Osstem Implant, finished with a sandblasted and acid-etched SA surface and supplied on two connection sizes.
- IDIS S-Plant IDIS A grade-4 titanium implant from IDIS with an SLA surface and a tapered conical-hex connection.
- Implance Aggressor Bone Level Implance A more aggressively tapered Implance bone-level implant intended for high primary stability in soft bone and extraction sockets.
- Implance Bone Level Implance The standard bone-level implant of Turkey’s Implance system, a hybrid tapered/cylindrical fixture with an internal conical connection.
- Implance Short Implant Implance The short-implant option within the Turkish Implance system, in bone-level and tissue-level forms for reduced bone height.
- Implance Tissue Level Implance The tissue-level implant of the Turkish Implance system, a transgingival hybrid fixture.
- MegaGen AnyOne A tapered implant from MegaGen offered with an 11-degree internal hex connection and a single prosthetic platform across almost the whole diameter range.
- MegaGen AnyRidge A tapered bone-level implant from MegaGen built around a knife-edge thread, in which the thread depth changes across the range while the core diameter stays the same.
- MIS C1 A conical, root-shaped bone-level implant from MIS with a dual thread and a 12-degree friction-fit conical connection with platform switching.
- MIS SEVEN A root-shaped bone-level implant from MIS on the internal hexagon platform, with micro-rings at the neck and a dome-shaped apex.
- MIS V3 A bone-level implant from MIS with a triangular coronal section and a 12-degree friction-fit conical connection, made in titanium alloy with a blasted and acid-etched surface.
- Neobiotech IS-II active Neobiotech A tapered bone-level implant from Neobiotech with an SLA surface, the predecessor family to the IS-III.
- Neobiotech IS-III active Neobiotech A tapered, internal-hex bone-level implant from Neobiotech with an SLA surface, designed for high primary stability.
- Neobiotech IS-III active Short Neobiotech A 6.6 mm short implant in the Neobiotech IS-III active family, for reduced vertical bone height.
- Neodent Drive GM A tapered bone-level implant from Neodent on the Grand Morse connection, presented for soft bone and extraction sockets where primary stability is difficult.
- Neodent GM Zygoma-S A zygomatic implant from Neodent that carries the Grand Morse connection, anchoring in the zygomatic bone when the posterior maxilla has resorbed beyond conventional implant placement.
- Neodent Helix GM A hybrid-shaped, fully tapered bone-level implant from Neodent, built on the Grand Morse connection and presented for all bone densities including immediate placement.
- Neodent Titamax GM A cylindrical, parallel-walled bone-level implant from Neodent on the Grand Morse connection, presented for dense bone and grafted sites.
- NobelActive Nobel Biocare A tapered implant from Nobel Biocare with an expanding tapered body, double-lead thread and reverse cutting blades, supplied with an internal conical connection and the TiUltra or TiUnite surface.
- NobelParallel Conical Connection Nobel Biocare A parallel-walled implant from Nobel Biocare with a tapered apex and threads running from tip to platform, using the same internal conical connection as NobelActive.
- NucleOSS T6 Standard NucleOSS The standard bone-level implant of the Turkish NucleOSS T6 family, with an internal-hex connection and a tapered, microthreaded body.
- NucleOSS T6 TorQ NucleOSS A high-primary-stability variant of the NucleOSS T6 bone-level implant, using a cutting thread aimed at immediate loading.
- Osstem TS II SA A submerged, straight-walled bone-level implant in Osstem’s TS line, sharing the TS internal hex and 11-degree tapered connection.
- Osstem TS III SA A submerged, tapered bone-level implant from Osstem Implant’s TS line, using an internal hex with an 11-degree tapered connection and the sandblasted, acid-etched SA surface.
- Osstem TS IV SA A submerged, tapered bone-level implant in Osstem’s TS line with a wider thread pitch, presented by the manufacturer for soft bone and the posterior maxilla.
- Shinhung Luna Shinhung An internal-hex bone-level implant made by Shinhung MST of South Korea.
- Southern Implants Co-Axis An implant design from Southern Implants in which the prosthetic platform and screw channel are built at an angle to the long axis of the implant, correcting angulation within the implant itself.
- Southern Implants Zygomatic range A family of zygomatic implants from Southern Implants, made in lengths from 27.5 mm to 60 mm and finished with a machined coronal surface, for maxillae too resorbed for conventional implants.
- Straumann BLX Straumann A fully tapered bone-level implant system from Straumann, made in Roxolid titanium-zirconium alloy and using the TorcFit prosthetic connection, intended for high primary stability and immediate treatment protocols.
- Straumann Bone Level Straumann The parallel-walled bone-level implant in the Straumann Dental Implant System, using the CrossFit connection and intended for placement at bone level with trans- or subgingival healing.
- Straumann Bone Level Tapered Straumann A bone-level implant from Straumann with an apically tapered, self-cutting body and the CrossFit connection, sharing the prosthetic portfolio of the parallel-walled Straumann Bone Level implant.
- Straumann Standard Straumann The classic parallel-walled tissue-level implant in the Straumann Dental Implant System, with a 2.8 mm machined neck and the synOcta connection.
- Straumann Standard Plus Straumann A parallel-walled tissue-level implant from Straumann with a 1.8 mm machined neck, using the synOcta connection on Regular Neck and Wide Neck platforms.
- Straumann TLX Straumann A fully tapered tissue-level implant system from Straumann, made in Roxolid and using the TorcFit connection, offered with either a 1.8 mm or a 2.8 mm transmucosal neck.
- Trausim Dental Implant System Trausim The FDA-cleared implant system of Jiangsu Trausim Medical Instrument of China, offered in bone-level and tissue-level designs.
- Warantec IU Implant System Warantec An internal-hex implant from Warantec offered in two thread geometries — a triangular and a square thread — with an SA surface.
- Z-Systems Z5 Z-Systems A two-piece, screw-retained zirconia ceramic implant range from the Swiss maker Z-Systems.
- ZERAMEX XT ZERAMEX A two-piece, screw-retained, metal-free zirconia ceramic implant from the Swiss ZERAMEX brand.
- ZimVie T3 ZimVie Dental A ZimVie implant line, inherited from Biomet 3i, offered in tapered and parallel-walled bodies with either the Certain internal connection or an external hex connection.
- ZimVie TSX ZimVie Dental A ZimVie tapered implant with a double-lead thread, an MTX surface below a 1.5 mm dual acid-etched coronal zone, and a conical hex or internal hex connection depending on platform.
In research
These entries exist in our database but not all of their key facts are verified yet, so they are not published to search engines. You can still read what we have.
Looking for a system that is no longer sold? Browse legacy and discontinued systems, or try identifying an implant you already have.